banner9

Point of Use Stations for industrial gases with inlet pressure up to 40 bars

Point of use units consisiting of a wall mounted bracket, shut-off valve, pipe compression fitting and pressure regulator (detachable) are mainly used in centralised gas systems. They serve as secondary pressure control and point-of-use gas withdrawal equipment in small and large gas distribution systems, where different gas pressure at different work places is needed. Alternatively to the withdrawal of compressed gas, flowmeter regulators can be installed on the units that deliver controlled amounts of gas as liters per minute.

Among the many advantages of using centralised gas systems with point of use units is the stable gas pressure derived from the usage of at least two pressure reducing valves installed consecutively in each of the centralised distribution systems.

Point of use units can be bundled into up to 4 withdrawal units for different gases with different pipe connections and pressure ranges.

For use with the following gases up to 40 bar:
oxygen, nitrogen, carbon dioxide, argon, helium, hydrogen, forming gas, synthetic air, compressed air, test gas, laughing gas and other non corrosive gases, acetylene up to 1,5 bar inlet
  

Page:  1 

Point of Use Unit

Point of Use Units - Onefold

Point of use unit for non-corrosive industrial gas with connection for one point of use regulator

For use with:
nitrogen, carbon dioxide,oxygen, acetylene, argon, helium, compressed air, hydrogen and other non corrosive gases

Max. inlet pressure: 40 bar, acetylene: 1,5 bar

Inlet connection acetylene:
welding cone 15 mm (pipe diameter) made of carbon steel

Inlet connection other gases:
Brass compression fitting 12 mm pipe (other dims upon request)
Brass brazing fitting 12 mm pipe

Outlet connections:
G 3/8 RH male thread for connection for regulator non-flammable gas
G 3/8 LH male thread for connection for regulator flammable gas, acetylene

Special executions upon request

You do not have permission to view the prices

Shippingtime: 1-2 day delivery 1-2 day delivery (abroad may vary) Weight per unit: 1 kg

Point of Use Unit twofold

Point of Use Units for Industrial Gas, twofold

Point of use unit for non-corrosive industrial gas with connection for three point of use regulator

For use with:
nitrogen, carbon dioxide,oxygen, acetylene, argon, helium, compressed air, hydrogen and other non corrosive gases

Max. inlet pressure: 40 bar, acetylene: 1,5 bar

Inlet connection acetylene:
welding cone 15 mm (pipe diameter) made of carbon steel
Inlet connection other gases:
Brass compression fitting 12 mm pipe
Brass brazing fitting 12 mm pipe

(other dims upon request)

Outlet connections:
G 3/8 RH male thread for connection of regulator non-flammable gas
G 3/8 LH male thread for connection of regulator flammable gas, test gas, acetylene

Special executions upon request

You do not have permission to view the prices

Shippingtime: 1-2 day delivery 1-2 day delivery (abroad may vary) Weight per unit: 2 kg

Point of Use Units for Industrial Gas, threefold

Point of Use Units for Industrial Gas, threefold

Point of use threefold unit for non-corrosive industrial gas with connection for three point of use regulators

For use with:
nitrogen, carbon dioxide,oxygen, acetylene, argon, helium, compressed air, hydrogen and other non corrosive gases

Max. inlet pressure: 40 bar, acetylene: 1,5 bar

Inlet connection acetylene:
welding cone 15 mm (pipe diameter)
made of carbon steel

Inlet connection other gases:
Brass compression fitting 12 mm pipe
Brass brazing fitting 12 mm pipe

Outlet connections:
G 3/8 RH male thread for connection of regulator non-flammable gas
G 3/8 LH male thread for connection of regulator flammable gas, acetylene

Other executions and connection dimensions and upon request

You do not have permission to view the prices

Shippingtime: 1-2 day delivery 1-2 day delivery (abroad may vary) Weight per unit: 3 kg

point-of-use-fourfold

Point of Use Units for Industrial Gas, fourfold

Point of use fourfold unit for non-corrosive industrial gas
with outlet connection for four point of use regulators

For use with:
nitrogen, carbon dioxide,oxygen, acetylene, argon, helium
compressed air, hydrogen and other non corrosive gases

Max. inlet pressure: 40 bar, acetylene: 1,5 bar

Inlet connection acetylene:
welding cone 15 mm (pipe diameter) made of carbon steel
Inlet connection other gases:
Brass compression fitting 12 mm pipe (other dims upon request)
Brass brazing fitting 12 mm pipe

Outlet connections:
G 3/8 RH male thread to connect regulators for non-flammable gas
G 3/8 LH male thread to connect regulators for flammable gas, acetylene

Special executions upon request

You do not have permission to view the prices

Shippingtime: 1-2 day delivery 1-2 day delivery (abroad may vary) Weight per unit: 4 kg

  

Page:  1 

Show 1 to 4 (from a total of 4 products)
Internetshop by Gambio.de © 2010