banner9

Pressure Regulator 2-stage 200 bar and outlet 10-100 Millibar

Shippingtime:
ca. 2-3 weeks ca. 2-3 weeks (abroad may vary)
1. Type of Gas:
3. Outlet Connection:
4. Shut-off valves:
You do not have permission to view the prices

Pressure regulators for high purity gases compressed in cylinders with maximum pressure of up to 200 bars. Units can be used for gases with purity up to 99.9999 %. Adjustable pressure control range: 10 - 100 Millibar.

Construction Material: Brass, chrome-plated for the following gases: Nitrogen,  CO2 (Carbon Dioxide), Argon, Helium and other Noble Gases, Compressed Air, Hydrogen, Methan, Test Gases

Technical Data:

Type: Single stage with inlet connection backwards, outlet downwards
Material Body: Brass chrome-plated
Material Diaphragm: Stainless Steel
Working Temperature: -20 - +60 Degrees Celsius
Leak Rate: 1x10 ^-8 mbar l/s He
Width x Height x Depth: 115 x 132 x 220 mm

Inlet Pressure P1: max. 200 bar
Working Pressure P2: adjustable pressure range: 10 - 100 Millibar
Gas Flow Rate Qmax.: ca. 1,8 Nm3/h (Norm Cubic Meters / Hour)

Shut Off Valve: (Selection possible upon ordering)
Safety Valve: Integrated

Gauges: Safety gauges acc to EN 562 with 50 mm diameter., Class 1.6, with bar-psi double scale
 - High Pressure Gauge: 0-316 bar - red mark at 200 bar
 - Low Pressure Gauge: 0 - 160 mbar - red mark at 100 mbar

Cylinder Connection: Manual connection according to gas type DIN 477, Part 1

Outlet non flammable gases: compression fitting for tube 6 mm -other outlet connection options available
Outlet flammable gases: compression fitting for tube 6 mm -other outlet connection options available
Internetshop by Gambio.de © 2010